← Fitness & Health Calculators

The Complete Guide to Fitness and Health: BMI, Calories, and Training

Your fitness numbers start with three measurements: your body mass index, your basal metabolic rate, and your total daily energy expenditure. BMI comes from weight and height, BMR estimates the calories your body burns at rest, and TDEE adds your activity on top. This guide explains each formula, works through the arithmetic, and shows which calculator reproduces every number.

By Jacob Levy, Founder of FigureQuick.com · Last reviewed 2026-11-19

What BMI is — and what it is not

Body mass index, or BMI, is weight divided by height squared: BMI = weight in kilograms / height in metres². It is a single number that summarises the relationship between weight and height, and it is the starting point for most fitness and health calculators because it needs only two measurements. The categories used by the BMI Calculator follow the standard bands published by the Centers for Disease Control and Prevention (CDC): under 18.5 is underweight, 18.5 to 24.9 is the healthy weight range, 25 to 29.9 is overweight, and 30 or above is obese.

BMI is a screening tool, not a diagnosis and not a measure of body fat. It cannot tell muscle apart from fat, so it can mislead for very muscular people, for older adults, and for children — an athlete with a lot of muscle can have a high BMI while being lean. That is why the calculators on this site pair BMI with other measurements: the Body Fat Calculator estimates body fat percentage from tape measurements, and the Lean Body Mass Calculator estimates how much of your weight is not fat. A BMI result is most useful as a first check, combined with a waist measurement and a body fat estimate.

Worked example: BMI of 25.8. Take a person weighing 180 pounds at 5 feet 10 inches tall. Convert to metric first: 180 pounds is 81.6 kg, and 70 inches is 1.78 metres. BMI = 81.6 / 1.78² = 81.6 / 3.16 = 25.8, which falls in the Overweight category. For that height, the healthy weight range — the weights that put BMI between 18.5 and 24.9 — is 58.5 to 78.7 kg, or 128.9 to 173.5 lb. The BMI Calculator reproduces this example exactly, and shows the same healthy range for any height.

The healthy weight range is wide on purpose: healthy weight depends on frame size, muscle, and age, not just height. The Ideal Weight Calculator gives a single target from the Devine formula — for a man who is 5 feet 10 inches tall, 50 kg for the first 5 feet plus 2.3 kg for each additional inch, which is 73.0 kg (161 lb) — but the BMI range is the more useful target, because it leaves room for different builds.

BMR: the calories you burn at rest

Your basal metabolic rate, or BMR, is the number of calories your body burns just to stay alive — breathing, keeping warm, running your organs — before any movement at all. It is the largest part of most people's daily calorie burn, and it is the base that every other calorie figure is built on. The BMR Calculator uses the Mifflin-St Jeor equation (Mifflin et al., American Journal of Clinical Nutrition, 1990), the most widely used estimate: for men, BMR = 10 × weight in kg + 6.25 × height in cm − 5 × age + 5; for women, the same formula ends with −161 instead of +5.

The formula shows which inputs matter. Weight is the biggest driver — every extra kilogram adds 10 calories a day. Height adds 6.25 calories per centimetre, and age subtracts 5 calories a year, which is why BMR drifts down over the decades even when weight and height stay the same. None of this is a measurement of your body — it is a population estimate, and two people with the same inputs can have different true BMRs.

Worked example: BMR and TDEE of 1,880 and 2,585. Take a 35-year-old man weighing 200 pounds (90.7 kg) and 72 inches tall (182.9 cm), lightly active. BMR = 10 × 90.7 + 6.25 × 182.9 − 5 × 35 + 5 = 907 + 1,143 − 175 + 5 = 1,880 calories a day at rest. Total daily energy expenditure, or TDEE, is BMR multiplied by an activity factor: 1.2 for a sedentary lifestyle, 1.375 for light exercise, 1.55 for moderate exercise, 1.725 for very active, and up to 1.9 for athletes and heavy physical labour. Lightly active means a factor of 1.375, so TDEE = 1,880 × 1.375 = 2,585 calories a day. With a 500-calorie daily deficit, the target is 2,085 calories a day, with macros of 200 g protein, 186 g carbs, and 60 g fat — and holding that deficit for 12 weeks projects a weight of 188.0 lb, from 200 lb. The Calorie Calculator reproduces this example exactly, including the macro split and the 12-week projection.

The activity factor is the easiest input to get wrong, and most people pick a level higher than their real life. A desk job with three workouts a week is lightly active, not very active. If your weight does not move after two or three weeks at the target, adjust by 100 to 200 calories rather than overhauling everything, since small, steady corrections work better than big swings. Re-run the numbers whenever your weight changes by more than a few pounds, because your BMR changes with it.

Calories burned during exercise

Exercise calories are estimated with MET values, where one MET is the energy cost of sitting still. The formula is: calories = MET × body weight in kilograms × hours of activity. The Calories Burned Calculator uses the standard MET values from the Compendium of Physical Activities (Ainsworth et al.): walking is 3.5 MET, yoga is 3.0, swimming and weightlifting are 6.0, cycling is 8.0, and running is 9.8.

Weight matters as much as effort: a heavier person burns more calories doing the same activity for the same time, because moving a heavier body takes more energy. Doubling the time doubles the calories, and picking a harder activity raises the per-hour burn. Three 60-minute runs a week at 70 kg, for example, burns 9.8 × 70 × 3 = 2,058 calories a week. Treat the result as an estimate, not an exact count: fitness, terrain, and intensity all shift the real number.

Worked example: a 30-minute walk burns 140 calories. Walking for 30 minutes at 80 kg burns 3.5 × 80 × 0.5 = 140 calories. The same walk at 60 kg burns 105 calories, and at 100 kg it burns 175 — the same walk, three different answers, because the weight in the formula changes. A 60-minute brisk walk at 70 kg burns 3.5 × 70 × 1 = 245 calories, so five such walks a week add up to 1,225 calories. The Calories Burned Calculator reproduces these figures for any weight, activity, and duration, and the guide How to Lose Weight Walking works through what a walking habit adds up to over a week and a month.

The U.S. Department of Health and Human Services' Physical Activity Guidelines for Americans, 2nd edition (2018), describes 150 minutes of moderate-intensity aerobic activity a week for adults, plus muscle-strengthening activities on two or more days a week.

Protein, carbohydrates, and fat: splitting the calories

A calorie target only becomes a diet once it is split into macros, and the split runs on fixed energy densities: protein and carbohydrates each carry 4 calories per gram, while dietary fat carries 9 calories per gram. That is why 10 extra grams of fat adds 90 calories, while 10 extra grams of carbohydrate adds only 40. The Bodybuilding & Fitness Macro Split Calculator (Per Day & Per Meal) sets protein first, fat second as a share of total calories, and gives carbohydrates whatever calories are left over — which is why the carb number moves when you change calories, protein, or fat share.

Protein is set from body weight. The Protein Calculator multiplies body weight by a grams-per-kilogram rate for the activity level: 0.8 for sedentary, 1.2 for active, 1.6 for athletes, and 2.0 for building muscle. At 70 kg and active, that is 70 × 1.2, or 84 grams of protein a day. The macro calculator uses grams per pound instead — 0.8 for active recreational training, 1.0 as the standard for strength and muscle building, and 1.2 when cutting, because extra protein protects muscle and keeps hunger down in a deficit. Fat is set as a share of total calories, 20% to 30%, with 25% as the default. Divide each daily gram total by the number of meals and you get the per-meal plate.

Worked example: 180 grams of protein a day. At 90 kg and building muscle, the daily protein target is 90 × 2.0 = 180 g, or 60 g per meal over three meals. Spreading protein across the day is easier to eat than loading it into one meal, and a palm-sized portion of meat, fish, eggs, or beans at each meal gets most people close. The Protein Calculator reproduces this example and splits any target across meals.

Worked example: a 2,100-calorie macro split. At 2,100 calories a day, 180 lb body weight, 1.0 g of protein per lb, and 25% of calories from fat across 4 meals: protein is 180 g, which is 720 calories; fat is 25% of 2,100, or 525 calories, which is 58 g; carbohydrates get what is left, (2,100 − 720 − 525) / 4 = 214 g. Per meal that is about 45 g of protein, 54 g of carbs, and 15 g of fat. If the carb target comes out very low, the diet will feel hard to sustain — either raise total calories, drop the fat share toward 20%, or accept a smaller deficit. The Bodybuilding & Fitness Macro Split Calculator (Per Day & Per Meal) reproduces this split, and the Carbohydrate Calculator and Fat Intake Calculator each work out one side of it on its own.

These rates are the calculators' own methods and the results are estimates for planning meals, not medical guidance. Needs shift with age, training, and health, so use the targets as a planning starting point and adjust them to how you feel and recover.

Body fat, lean mass, and ideal weight

BMI uses only weight and height, so the calculators that look closer use tape measurements or a different formula. The Body Fat Calculator uses the U.S. Navy method, which estimates body fat from height and circumference measurements — height, neck, and waist for men, plus hips for women. A man who is 72 inches tall with a 16-inch neck and a 36-inch waist comes out at 12.1% body fat, in the Athletic category. For men, 14 to 17% is fit and 18 to 24% is average; for women, 21 to 24% is fit and 25 to 31% is average. The tape method is usually accurate within about 3 to 4 percentage points of lab measurements — but only if the measurements are taken the same way every time, since a one-inch error at the waist can shift the result by several percentage points.

The Lean Body Mass Calculator uses the Boer formula: for men, lean mass = 0.407 × weight in kg + 0.267 × height in cm − 19.2; for women, 0.252 × weight in kg + 0.473 × height in cm − 48.3. An 80 kg man at 180 cm has about 61.4 kg of lean mass, leaving about 18.6 kg of fat, or 23.2% body fat. Lean mass is useful for tracking progress: if your weight stays the same but your lean mass rises, you have swapped fat for muscle. Treat the numbers as estimates — the Boer formula is a population estimate, not a body scan, and it works best for adults of average build.

Body surface area is a different kind of measurement again. The Body Surface Area Calculator uses the Mosteller formula (Mosteller, 1987): BSA = the square root of (height in cm × weight in kg / 3,600). A person 175 cm tall weighing 70 kg has a body surface area of 1.84 m², and a typical adult is about 1.7 to 1.9 m². BSA matters because many things scale with surface area rather than weight alone — for example, how much heat the body loses and how some medicines are dosed.

Use this calculator with clients → White-label.

Training numbers: strength, pace, and heart rate

You do not need to test a true one-rep max to know it: two classic strength equations estimate it from any set taken to failure. The Epley equation (Epley, 1985) says 1RM = weight × (1 + reps / 30), and the Brzycki equation (Brzycki, 1993) says 1RM = weight × 36 / (37 − reps). The One-Rep Max (1RM) Bench, Squat & Deadlift Percentage Calculator averages the two. Lifting 225 lb for 5 reps to failure gives an Epley estimate of about 263 lb and a Brzycki estimate of about 253 lb, averaging to roughly 258 lb — 257.8 lb exact — with a heavy strength load of 230 lb at 90% and a hypertrophy load of 205 lb at 80%, rounded to the nearest 5 lb so the numbers match the plates you can actually load. The estimates are most accurate between 2 and 10 reps, and the set must be a true failure set — if you stopped with reps left, the estimate will be low.

Running pace is time divided by distance. The Pace Calculator works it out either way round: run 10 kilometres in 50 minutes and your pace is 5 minutes per kilometre, or about 8 minutes per mile, which is 12 kilometres per hour. To predict a race finish time, multiply your target pace by the distance — a 5:00 per kilometre pace over 10 kilometres is a 50-minute finish. To set a pace goal from a target time, divide the target time by the distance.

Heart rate zones come from two numbers: maximum heart rate, estimated as 220 minus age, and resting heart rate. The Target Heart Rate Calculator uses the Karvonen method (Karvonen et al., 1957): each zone is resting heart rate plus a percentage of the heart rate reserve, which is maximum minus resting. At age 30 with a resting heart rate of 70 bpm, the maximum is 190 bpm and the zones run from 130 bpm at 50% up to 172 bpm at 85%. The lower zones suit easy runs and recovery, the middle zones suit steady aerobic training, and the top zones suit short hard intervals. Maximum heart rate varies between people of the same age, so the zones are estimates — if they feel far too easy or far too hard, a heart rate monitor and how you feel are better guides than the formula alone.

Sleep: counting back in 90-minute cycles

Sleep runs in cycles of about 90 minutes, and waking at the end of a cycle feels easier than waking in the middle of one. The Sleep Calculator counts back from your wake-up time in 90-minute steps: bedtime is the wake-up time minus the number of cycles times 90 minutes, and total sleep is cycles times 1.5 hours. To wake at 06:30 after 6 sleep cycles, the bedtime is 21:30, giving 9.0 hours of sleep; with 5 cycles it is 7.5 hours back to a 23:30 bedtime, and with 4 cycles it is 6 hours back to 01:00. Most adults do best with 5 or 6 cycles a night. If you keep waking up groggy, try shifting by one whole cycle — 90 minutes earlier or later — rather than by 15 or 30 minutes, so you still land at the end of a cycle.

Pregnancy, cycles, and due dates

The pregnancy calculators all work from dates, not from symptoms. A due date can be figured two ways: from the first day of the last menstrual period, add 280 days (40 weeks); from the date of conception, add 266 days (38 weeks). Both methods land on the same date when the cycle is a typical 28 days, because conception happens about 14 days after the last period starts. The Due Date Calculator uses Naegele's rule: for a conception date of January 15, 2026, the estimated due date is October 8, 2026 — 266 days later. A due date is an estimate: only about 5% of babies are born on it, and a first-trimester ultrasound is the most accurate way to date a pregnancy. The Pregnancy Calculator takes the first day of the last period and returns the due date, how far along the pregnancy is, and the current trimester, and the Pregnancy Conception Calculator works backwards from a due date — with a due date of October 8, 2026, the estimated conception date is January 15, 2026.

Ovulation usually happens about 14 days before the next period starts, so the Ovulation Calculator finds it by adding the cycle length minus 14 days to the first day of the last period. With a 28-day cycle that is 14 days after the period starts; with a 30-day cycle it is 16 days after. The fertile window is the six days ending just after ovulation: it opens five days before ovulation, because sperm can survive up to five days, and closes the day after. With a last period starting October 5, 2026 and a 30-day cycle, ovulation is estimated for October 21, 2026, the fertile window runs October 16 to October 22, 2026, and the next period starts November 4, 2026. The Period Calculator predicts the next period the same way — add the usual cycle length to the first day of the last period — and these dates are estimates, not medical guidance, because ovulation timing and cycle length vary from cycle to cycle.

The Pregnancy Weight Gain Calculator starts from pre-pregnancy BMI and shows a reference total weight-gain range for that BMI band: underweight (BMI under 18.5) 28 to 40 lb, normal weight (18.5 to 24.9) 25 to 35 lb, overweight (25 to 29.9) 15 to 25 lb, and obese (30 and over) 11 to 20 lb — the Institute of Medicine's 2009 ranges. At 80 kg before pregnancy and 165 cm tall, the pre-pregnancy BMI is 29.38, giving a reference range of 15 to 25 lb, and at 88 kg in week 30 the weight gained so far is 8.0 kg, or 17.6 lb. Weight gain varies a lot between pregnancies, and a doctor's advice for the individual situation is what counts.

The clinical calculators: risk, kidney function, and alcohol

Some calculators in this cluster estimate clinical risk, and they are the ones where the formula's source matters most. The ASCVD Risk Calculator estimates the 10-year risk of a first heart attack or stroke with the pooled cohort equations from the 2013 ACC/AHA guideline (Goff et al., 2013), for adults aged 40 to 79 without established heart disease. The equations are four separate models — White women, African American women, White men, and African American men — built from the natural logs of age, total cholesterol, HDL cholesterol, and systolic blood pressure, plus terms for smoking, diabetes, and blood pressure treatment. The result is an estimate for information only, not a diagnosis.

Kidney function is estimated from a routine serum creatinine blood test plus age, sex, and weight. The Creatinine Clearance Calculator uses the Cockcroft-Gault equation (Cockcroft and Gault, 1976): CrCl = (140 − age) × weight in kg / (72 × serum creatinine in mg/dL), multiplied by 0.85 for women. The eGFR Calculator and the GFR Calculator use the CKD-EPI 2021 creatinine equation (Inker et al., New England Journal of Medicine, 2021), refitted without a race term, which is the current standard. Results are read in CKD stages — G1 is 90 or above, G2 is 60 to 89, G3a is 45 to 59, G3b is 30 to 44, G4 is 15 to 29, and G5 is below 15 — and chronic kidney disease is only diagnosed when eGFR stays below 60 for at least three months, or when there are other signs of kidney damage. A single low reading needs repeating, and the equations assume stable creatinine, so they are less reliable during acute illness, in pregnancy, and in people with very high or low muscle mass.

The BAC Calculator estimates blood alcohol concentration with the Widmark formula (Widmark, 1932). Each standard drink holds about 14 grams of pure alcohol; the estimated BAC is total grams divided by body weight in kilograms times a body-water factor (0.68 for men, 0.55 for women) times 10, minus 0.015 percentage points for each hour since the first drink, because the body clears alcohol at roughly that rate. A man weighing 80 kg who has 3 standard drinks over 2 hours gets an estimated BAC of 0.047%, from 42 g of alcohol, and the estimate would take about 3.1 hours to reach zero. The result is a percentage: 0.08% is the legal driving limit in most US states. These are estimates only, not legal or medical guidance — food, health, medicines, and individual differences all change how alcohol affects you, and the only safe choice after drinking is not to drive.

Common mistakes

The most common mistakes with fitness numbers are arithmetic, not judgement. The first is reading BMI as a body fat measurement — it is weight over height squared, nothing more, and a muscular person can sit in the overweight band while being lean. The second is picking an activity factor that describes an aspiration rather than a life: a desk job with three workouts a week is lightly active, and an inflated factor inflates the TDEE and the calorie target with it. The third is treating a calorie-burn estimate as an exact count — MET values are averages, and fitness, terrain, and intensity all shift the real number. The fourth is cutting protein first in a deficit, when protein is the macro that protects muscle and keeps hunger down. The fifth is taking one reading of a clinical estimate — a single eGFR, a single body fat percentage — as a verdict, when a trend over weeks matters more than any single reading.

Every tool in this cluster

The table below lists every fitness and health calculator on FigureQuick, with the situation each one is for. Start with BMI, BMR, and the calorie calculator, then use the specialist tools for the training, nutrition, sleep, or pregnancy question in front of you.

CalculatorUse this when
ASCVD Risk CalculatorEstimating your 10-year risk of a first heart attack or stroke from age, cholesterol, blood pressure, smoking, and diabetes.
BAC CalculatorEstimating blood alcohol concentration from drinks, body weight, sex, and hours since you started drinking.
BMI CalculatorWorking out your body mass index from weight and height and seeing which weight category it falls into.
BMR CalculatorWorking out your basal metabolic rate — the calories your body burns at rest — with the Mifflin-St Jeor equation.
Body Fat CalculatorEstimating your body fat percentage with the U.S. Navy method from height and tape measurements.
Body Surface Area CalculatorWorking out your body surface area in square metres with the Mosteller formula from height and weight.
Calories Burned CalculatorEstimating the calories burned during exercise from your weight, the activity, and how long you did it, using MET values.
Carbohydrate CalculatorWorking out how many grams of carbs to eat per day from your daily calories and the share of calories from carbs.
Creatinine Clearance CalculatorEstimating kidney function with the Cockcroft-Gault equation from age, weight, sex, and serum creatinine.
Due Date CalculatorWorking out an estimated due date from the first day of the last period or the date of conception.
eGFR CalculatorEstimating kidney function with the race-free CKD-EPI 2021 equation from serum creatinine, age, and sex.
Fat Intake CalculatorWorking out how many grams of fat to eat per day from your daily calories and the share of calories from fat.
GFR CalculatorComparing kidney function with the CKD-EPI 2021 and MDRD equations side by side, with the CKD stage.
Ideal Weight CalculatorFinding your ideal body weight with the Devine formula and seeing the healthy weight range for your height.
Lean Body Mass CalculatorEstimating lean body mass in kilograms with the Boer formula from weight, height, and sex.
Bodybuilding & Fitness Macro Split Calculator (Per Day & Per Meal)Splitting a daily calorie target into protein, carbohydrate, and fat grams per day and per meal.
One-Rep Max (1RM) Bench, Squat & Deadlift Percentage CalculatorEstimating your one-rep max from a set taken to failure and working out the training percentages.
Ovulation CalculatorEstimating your ovulation date and fertile window from the first day of your last period and your cycle length.
Pace CalculatorWorking out your running pace per kilometre or mile from distance and time, or a finish time from a target pace.
Period CalculatorPredicting your next period dates from the first day of your last period and your usual cycle length.
Pregnancy CalculatorFinding your due date, how far along you are, and your current trimester from the first day of your last period.
Pregnancy Conception CalculatorEstimating when conception happened and when the fertile window was, from a due date.
Pregnancy Weight Gain CalculatorEstimating a reference pregnancy weight-gain range from pre-pregnancy BMI and tracking weight gained so far.
Protein CalculatorWorking out your daily protein target in grams from body weight and activity level, plus a per-meal split.
Sleep CalculatorFinding the best bedtime for your wake-up time using 90-minute sleep cycles.
Target Heart Rate CalculatorFinding your maximum heart rate and Karvonen training zones from your age and resting heart rate.
Calorie CalculatorWorking out your total daily energy expenditure, resting BMR, daily macro targets, and 12-week weight projection.

Sources and methodology

Every figure in this guide comes from a named source or a labelled example assumption. Body mass index categories: Centers for Disease Control and Prevention (CDC). Basal metabolic rate: the Mifflin-St Jeor equation (Mifflin et al., American Journal of Clinical Nutrition, 1990). Activity energy: MET values from the Compendium of Physical Activities (Ainsworth et al.). Physical activity pattern: U.S. Department of Health and Human Services, Physical Activity Guidelines for Americans, 2nd edition (2018). Strength estimates: the Epley equation (Epley, 1985) and the Brzycki equation (Brzycki, 1993). Heart rate zones: the Karvonen method (Karvonen et al., 1957). Body surface area: the Mosteller formula (Mosteller, 1987). Cardiovascular risk: the 2013 ACC/AHA pooled cohort equations (Goff et al., 2013). Kidney function: the Cockcroft-Gault equation (Cockcroft and Gault, 1976) and the CKD-EPI 2021 creatinine equation (Inker et al., New England Journal of Medicine, 2021). Blood alcohol: the Widmark formula (Widmark, 1932). Pregnancy weight-gain ranges: Institute of Medicine (2009). All worked-example arithmetic was computed with the standard formulas and checked in Python against the calculator specifications. The results are estimates for information only — they are not medical advice, and they do not diagnose or treat any condition. Last reviewed 2026-11-19.

Frequently asked questions

How much protein do I need per day?

It depends on body weight and activity level. The Protein Calculator multiplies body weight by a grams-per-kilogram rate: 0.8 for sedentary, 1.2 for active, 1.6 for athletes, and 2.0 for building muscle. At 70 kg and active, that is 70 × 1.2, or 84 grams of protein a day, split as 28 grams per meal over three meals.

How many grams of protein should you eat a day to gain muscle?

In this calculator, the rate for building muscle is 2.0 grams of protein per kilogram of body weight a day. At 90 kg that is 180 grams a day, or 60 grams per meal over three meals. The macro calculator uses a different unit — 1.0 gram per pound for strength and muscle building — which works out to a similar target for most people.

What is the difference between BMR and TDEE?

BMR is the calories your body burns at rest, estimated by the Mifflin-St Jeor equation from weight, height, age, and sex. TDEE is BMR multiplied by an activity factor — 1.2 for sedentary up to 1.9 for athletes — so it is your total daily calorie burn including movement. A 35-year-old man at 200 lb and 72 inches has a BMR of 1,880 calories and, lightly active, a TDEE of 2,585 calories.

What is a healthy BMI?

The healthy BMI range is 18.5 to 24.9. Below 18.5 is underweight, 25 to 29.9 is overweight, and 30 or above is obese, using the standard CDC bands. BMI is a screening tool, not a body fat measurement: a person weighing 180 pounds at 5 feet 10 inches has a BMI of 25.8, in the overweight band, and the healthy weight range for that height is 128.9 to 173.5 lb.

How many calories do I burn walking for 30 minutes?

It depends on your weight. Walking is 3.5 MET, so the formula is 3.5 × weight in kilograms × 0.5 hours. At 80 kg that is 140 calories; at 60 kg it is 105 calories, and at 100 kg it is 175 calories. A 60-minute brisk walk at 70 kg burns 245 calories. The Calories Burned Calculator works this out for any weight, activity, and duration.

If I conceived today, when would I be due?

Add 266 days (38 weeks) to the conception date. For a conception date of January 15, 2026, the estimated due date is October 8, 2026. The same date comes from adding 280 days (40 weeks) to the first day of the last menstrual period, because conception happens about 14 days after the period starts in a typical 28-day cycle. A due date is an estimate — only about 5% of babies are born on it.

How does the sleep calculator choose a bedtime?

Sleep runs in cycles of about 90 minutes, and the calculator counts back from your wake-up time in 90-minute steps. To wake at 06:30 after 6 sleep cycles, the bedtime is 21:30, giving 9.0 hours of sleep. With 5 cycles it is a 23:30 bedtime for 7.5 hours, and with 4 cycles it is 01:00 for 6 hours. Most adults do best with 5 or 6 cycles a night.

More Fitness & Health Calculators

← Back to all calculators