How to Calculate Square Footage
Square footage is a room's length times its width, both measured in feet. A 20-by-15-foot room is 300 square feet, and an L-shaped room is measured as two rectangles added together. This guide shows how to measure any room, convert the result, and add the waste allowance materials need.
By Jacob Levy, Founder of FigureQuick.com · Last reviewed 2026-11-19
The rectangle formula
Square footage is the area of a space, found by multiplying its length by its width. Measure both sides in feet and the result is in square feet. A room 20 feet long and 15 feet wide covers 300.00 square feet. That is the whole formula for any rectangular room, and it is the starting point for flooring, paint, turf, and heating estimates. The Square Footage Calculator does the multiplication and also shows the same area in square yards and acres.
Measure with a tape measure along the longest points of each wall, in feet, and write both numbers down before multiplying. If a measurement falls between whole feet, measure in feet and inches and convert the inches by dividing by 12 — 15 feet 6 inches is 15.5 feet. Measuring at the narrowest point, or guessing from a listing, understates the area and everything ordered from it.
Measure wall to wall, not along the skirting, and include the space under built-in wardrobes or kitchen units only if the flooring or covering goes under them — if it does not, measure the visible floor instead. For a room with a bay window, measure the main rectangle first and then the bay as its own rectangle, and add the two together, the same way an L-shaped room is split. Doorways and thresholds do not change the area: the room is measured to the walls, and the doorway is part of the room it opens from. If the room is being measured for carpet, measure the longest length and the longest width even if they are on opposite sides of the room, because carpet is cut from a roll to the largest dimension in each direction.
L-shaped and irregular rooms
For an L-shaped room or an irregular plot, split the space into rectangles, work out the square footage of each piece separately, and add the results together. That keeps the math exact instead of guessing an average length or width. Draw the room on paper first, mark the split lines, and measure each rectangle on its own.
Worked example: an L-shaped room. Split the room into a main rectangle 20 feet by 15 feet and a smaller rectangle 10 feet by 8 feet. The main part is 20 × 15 = 300 square feet and the smaller part is 10 × 8 = 80 square feet, so the room is 300 + 80 = 380 square feet in total. The Square Footage Calculator works out each rectangle separately — run it once per piece and add the results.
Round spaces
A round space uses the circle area formula: pi times the radius squared. Measure across the widest point to get the diameter, halve it for the radius, then multiply pi (3.14159) by the radius times itself. A round room with a radius of 6 feet covers 3.14159 × 6 × 6 = 113.10 square feet. The same split-into-pieces approach works for a room that is mostly rectangular with a curved bay: measure the rectangle, measure the curve separately, and add them.
Converting square feet to square yards and acres
The same area is also shown in square yards, which is the square footage divided by 9, and in acres, which is the square footage divided by 43,560. A 300-square-foot room is 300 ÷ 9 = 33.33 square yards. Square yards are the unit carpet and turf are often sold in, so the conversion matters when ordering. Acres are useful when the space is large enough that square feet become an unwieldy number — a 43,560-square-foot plot is exactly 1 acre.
Use this calculator with clients → White-label.
Add waste when buying materials
Measure the longest points and round up slightly when buying materials. Flooring, paint, and turf all come in fixed sizes and leave offcuts, so adding about 10 percent to the measured area covers waste and mistakes without overspending. For flooring specifically, the waste allowance is built into the ordering math: the Flooring & Tile Calculator adds the waste percentage to the net area and rounds up to whole boxes, so a 396-square-foot room at 10% waste orders 19 boxes covering 448.4 square feet instead of the exact 396. Keep at least one spare box from the same dye lot for future repairs, because a later batch can be a slightly different shade.
For the full picture of what square footage feeds into — flooring, roofing, gravel, and more — see The Complete Guide to Construction Costs: Concrete, Roofing, Flooring, and More.
Sources and methodology
Square footage is length times width, both in feet; square yards are square feet divided by 9 and acres are square feet divided by 43,560, as stated on the Square Footage Calculator. The L-shaped room example (300 + 80 = 380 square feet) and the round-room example (pi × 6 × 6 = 113.10 square feet) are plain geometry, re-computed in Python. The 10 percent waste allowance for materials is the calculator's stated guidance. This guide is educational: it describes how the calculators work, not advice about which materials to choose. Last reviewed 2026-11-19.
Frequently asked questions
How do I calculate square feet of a room?
Multiply the room's length by its width, both measured in feet. A room 20 feet long and 15 feet wide covers 300 square feet. For an L-shaped room, split it into rectangles, work out each piece, and add the results.
How do I measure square feet?
Measure the longest points of each side with a tape measure, in feet, then multiply length by width. Convert inches to feet by dividing by 12 — 15 feet 6 inches is 15.5 feet. To convert the result, divide square feet by 9 for square yards and by 43,560 for acres.
How do I figure out the square footage of an L-shaped room?
Split the room into rectangles and add the areas. A room made of a 20 by 15 foot rectangle and a 10 by 8 foot rectangle is 300 + 80 = 380 square feet. The Square Footage Calculator works out each rectangle separately.
How many square feet are in a square yard?
There are 9 square feet in a square yard, so divide square feet by 9. A 300-square-foot room is 33.33 square yards. Carpet and turf are often sold by the square yard, so this conversion is the one to use when ordering.
