← Math Calculators

The Complete Guide to Everyday Math: Percentages, Algebra, Geometry, and Statistics

Everyday math is a small set of tools — percentages, ratios, algebra, geometry, and statistics — used to turn numbers into decisions, from a sale price to a loan, a recipe to a survey result. This guide explains each tool, shows the formulas in plain language, and works through real examples you can check.

By Jacob Levy, Founder of FigureQuick.com · Last reviewed 2026-11-19

What everyday math actually is

Most of the math an adult uses in a normal week comes from five areas. Percentages answer "how much of this, out of a hundred?" — discounts, tips, tax, interest, and changes in price. Ratios compare two quantities, such as flour to sugar in a recipe or income to rent. Algebra finds an unknown number, such as the price before a discount or the time a journey takes. Geometry measures the world: the area of a room, the volume of a tank, the length of a diagonal. Statistics summarises a pile of numbers — an average, a spread, a probability — so a whole dataset can be described in a few figures.

These areas overlap constantly. A percentage is a ratio out of a hundred. A slope is a ratio of vertical change to horizontal change. A standard deviation is built from squares and square roots. Learning them as one connected toolkit, rather than as separate school topics, is what makes them useful: the same few operations — adding, multiplying, dividing, squaring, taking a root — appear in every area, just arranged differently. The calculators in the table below each handle one arrangement, and this guide explains the thinking behind them.

The other thing the five areas share is that the arithmetic is rarely the hard part. The hard part is setting the problem up: knowing which numbers go where, which value is the starting point, and what the answer means. A percentage-off calculation fails when the discount is taken off the wrong price; a ratio fails when the two sides are mixed up; a statistic misleads when the wrong average is used. Each section below therefore spends as much time on the setup — what the inputs are and what the output means — as on the calculation itself.

Percentages: the most-used math of all

Percent means "out of one hundred", so 25% is 25 out of every 100, or one quarter. To find X% of Y, multiply Y by X and divide by 100. To find what percent X is of Y, divide X by Y and multiply by 100. To find a percent change, subtract the old value from the new value, divide by the old value, and multiply by 100 — a positive answer is an increase, a negative one a decrease. Percent change is always measured against the starting value, not the ending one, which is the mistake most people make with it.

Worked example: 25% off an $80 jacket. The discount is 25% of $80, which is 80 × 25 / 100 = $20. The price to pay is $80 − $20 = $60. The same arithmetic works for any discount: 20% off a $150 bill is a $30 reduction, leaving $120 to pay. The Percent Off Calculator reproduces this example exactly — enter the original price and the discount percentage and it returns both the saving and the price to pay.

Percent change shows up wherever a number moves: prices, pay, weight, test scores, investment values. A price that rises from $50 to $75 has gone up by (75 − 50) / 50 × 100 = 50%. A price that falls from $200 to $150 is down by (150 − 200) / 200 × 100 = −25%, which is the same as saying the item is 25% off. The Percentage Calculator handles all three jobs — a percentage of a number, one number as a percentage of another, and percent increase or decrease — from the same inputs.

Percent error is a close cousin, used when a measurement is compared with a known true value. It is the absolute difference between the measured value and the true value, divided by the true value, times 100. If a scale reads 9.8 kg for a 10 kg weight, the error is |9.8 − 10| / 10 × 100 = 2%. The true value is always the denominator, because the error is measured against what is correct, not against the measurement. The Percent Error Calculator works this out for any measured and true values, and it is the tool to reach for whenever an experiment, a reading, or an estimate needs to be judged against a known figure.

The common percentage mistakes are all setup mistakes. Taking a percentage off the wrong base — for example, applying a second 10% discount to the original price instead of to the already-discounted price. Adding percentages that have different bases, such as a 20% rise followed by a 20% fall, which does not return to the starting value: $100 up 20% is $120, and $120 down 20% is $96. And confusing percentage points with percent: a rate rising from 5% to 7% has risen by 2 percentage points, which is a 40% relative increase. Keeping the base straight prevents all three.

Ratios and proportions

A ratio compares two quantities by division. The ratio 12:18 says that for every 12 of one thing there are 18 of another, and it simplifies by dividing both sides by their greatest common factor, 6, to 2:3. Ratios are used wherever a mixture or a relationship has to be kept constant while the amounts change: scaling a recipe, mixing paint, splitting a bill in agreed shares, or comparing two prices per unit. A ratio can be written with a colon (2:3), as a fraction (2/3), or as a decimal (0.667), and all three say the same thing.

A proportion is an equation between two ratios, and it is how a ratio solves for an unknown. If 3 kg of flour costs $6, how much does 7 kg cost? The ratio of flour to price is 3:6, so 7 kg costs 7 × 6 / 3 = $14. The rule is to keep the same order on both sides: flour over price on the left, flour over price on the right. Cross-multiplication does the same job in one step, but writing the units out — kilograms over dollars — is what stops the two sides being swapped.

Worked example: scaling a recipe. A recipe serves 4 and uses a 3:2 ratio of flour to sugar, with 300 g of flour and 200 g of sugar. To serve 10, multiply both amounts by 10 / 4 = 2.5: flour becomes 300 × 2.5 = 750 g and sugar becomes 200 × 2.5 = 500 g. The ratio is still 750:500, which simplifies back to 3:2, so the recipe tastes the same. The Ratio Calculator simplifies ratios, scales them, and solves for a missing value in a proportion.

Ratios also appear in disguise. An aspect ratio of 16:9 describes a screen's width against its height. A slope of 2 is a ratio of 2 units up for every 1 unit across. A probability of 1 in 6 is a ratio of favourable outcomes to total outcomes. Recognising the ratio inside the problem is usually the whole battle; the arithmetic after that is one division.

Algebra: finding the unknown

Algebra is arithmetic with a missing number, written as a letter. The core move is doing the same thing to both sides of an equation until the unknown stands alone. In 3x + 5 = 20, subtract 5 from both sides to get 3x = 15, then divide both sides by 3 to get x = 5. Checking is free: 3 × 5 + 5 = 20, so the answer is right. Two-step equations like this one cover most everyday algebra — working out a price before tax, a distance from a speed and a time, or a quantity from a total and a unit price.

The slope of a straight line is the ratio of its vertical change to its horizontal change: slope = (y₂ − y₁) / (x₂ − x₁), often remembered as "rise over run". A slope of 2 means the line rises 2 units for every 1 unit it runs. A positive slope climbs left to right, a negative slope falls, a zero slope is flat, and a vertical line has no defined slope because its run is zero and division by zero is not allowed.

Worked example: the slope between two points. Take the points (2, 3) and (6, 11). The rise is 11 − 3 = 8 and the run is 6 − 2 = 4, so the slope is 8 / 4 = 2. The line through those points rises 2 units for every 1 unit across, and its equation is y = 2x − 1 — at x = 2, y = 3, which checks out. The Slope Calculator finds the slope, the equation of the line, and the distance between any two points.

Quadratic equations — those with an x² term — are the next step up, and they are solved with the quadratic formula: for ax² + bx + c = 0, x = (−b ± √(b² − 4ac)) / 2a. The part under the square root, b² − 4ac, is called the discriminant: if it is positive there are two real answers, if it is zero there is one, and if it is negative there are no real answers.

Worked example: solving x² − 5x + 6 = 0. Here a = 1, b = −5, and c = 6. The discriminant is (−5)² − 4 × 1 × 6 = 25 − 24 = 1, so there are two answers: x = (5 + 1) / 2 = 3 and x = (5 − 1) / 2 = 2. Checking: 3² − 15 + 6 = 0 and 2² − 10 + 6 = 0. The Quadratic Formula Calculator solves any quadratic the same way and shows both roots. The Algebra Calculator handles equations of all kinds, and the Graphing Calculator plots the curve so the roots are visible where it crosses the x-axis.

Geometry: measuring shapes

Geometry is the math of sizes and shapes, and a handful of formulas covers most everyday jobs. The area of a rectangle is length × width: a room 12 ft by 7 ft is 84 sq ft, which is the figure a flooring quote is based on. The area of a triangle is half the base times the height. The area of a circle is πr², where r is the radius: a circle with a radius of 5 has an area of π × 25 = 78.54, and a circumference of 2πr = 31.42. The volume of a box is length × width × height: a box 4 × 3 × 2 holds 24 cubic units.

The Pythagorean theorem is the single most useful geometry result: in a right triangle, a² + b² = c², where c is the hypotenuse, the side opposite the right angle. It finds a missing side, and it also checks whether a corner is square — builders use the 3-4-5 triangle for exactly that, because 3² + 4² = 5².

Worked example: the diagonal of a 6 by 8 rectangle. The diagonal is the hypotenuse of a right triangle with sides 6 and 8, so its length is √(6² + 8²) = √(36 + 64) = √100 = 10. The Pythagorean Theorem Calculator finds any missing side of a right triangle, and the Right Triangle Calculator solves the whole triangle — all sides, angles, area, and perimeter — from the pieces known. For three-dimensional work, the Surface Area Calculator and Volume Calculator cover spheres, cylinders, cones, and boxes.

Use this calculator with clients → White-label.

The usual geometry mistakes are unit mistakes and radius-versus-diameter mistakes. Areas use square units and volumes cubic units, so a room measured in feet gives square feet, and mixing feet with inches in the same formula gives a wrong answer by a factor of 12. A circle's diameter is twice its radius, so using the diameter where the formula wants the radius quadruples the area. Writing the units down next to each number catches both.

Fractions, factors, and roots

Fractions are division written down: 3/4 means 3 divided by 4. To add or subtract fractions, first give them a common denominator, then add or subtract the numerators: 1/2 + 1/3 becomes 3/6 + 2/6 = 5/6, which is about 0.8333 as a decimal. To multiply, multiply the numerators together and the denominators together. To divide, flip the second fraction and multiply. Every answer is simplified by dividing the top and bottom by their greatest common divisor.

Factors are the numbers that divide into another number exactly. The factors of 12 are 1, 2, 3, 4, 6, and 12. The greatest common factor (GCF) of two numbers is the largest factor they share: the GCF of 12 and 18 is 6. The least common multiple (LCM) is the smallest number both divide into: the LCM of 12 and 18 is 36. The GCF simplifies fractions and splits things into equal groups; the LCM is what makes denominators match when fractions are added. The guide GCF vs LCM: What They Mean and How to Find Them works through both in detail, and the GCF Calculator, LCM Calculator, and Common Factor Calculator do the arithmetic.

Powers and roots are opposites. 2ⁱ⁰ means 2 multiplied by itself ten times, which is 1,024. A square root undoes a square: √144 = 12, because 12 × 12 = 144. Logarithms undo powers: log₁₀(1000) = 3, because 10³ = 1,000, and the natural logarithm ln(e) = 1. The Exponent Calculator, Root Calculator, and Log Calculator cover these, and the Scientific Notation Calculator converts very large and very small numbers into the compact form scientists use.

Statistics: summarising a pile of numbers

Statistics turns a list of numbers into a few figures that describe it. The mean is the sum divided by how many numbers there are. The median is the middle value when the numbers are sorted. The mode is the most common value. The range is the largest minus the smallest. For the list 3, 5, 7, 7, 9, the mean is 31 / 5 = 6.2, the median is 7, the mode is 7, and the range is 9 − 3 = 6. The mean is pulled by extreme values and the median is not, which is why house prices are usually reported as a median: a few very expensive homes lift the mean but leave the median alone.

Standard deviation measures how spread out the numbers are around the mean: find how far each number sits from the mean, square those distances, average them, and take the square root. A small standard deviation means the numbers cluster tightly; a large one means they are widely spread. There are two versions: population standard deviation divides by the number of values (n) and is used when the list is the entire group, while sample standard deviation divides by n − 1 and is used when the list is a sample drawn from a larger group.

Worked example: the standard deviation of eight test scores. Take the scores 2, 4, 4, 4, 5, 5, 7, 9. Their mean is 40 / 8 = 5. The squared distances from the mean are 9, 1, 1, 1, 0, 0, 4, and 16, which add up to 32. Dividing by 8 gives 4, and √4 = 2, so the population standard deviation is 2. Dividing by 7 instead gives 32 / 7 = 4.5714, and √4.5714 = 2.1381, so the sample standard deviation is 2.1381. The Standard Deviation Calculator returns both versions, and the Mean, Median, Mode & Range Calculator and Statistics Calculator summarise any list in one place.

Two more statistics tools complete the picture. A z-score says how many standard deviations a value sits from the mean: a score of 85, with a mean of 70 and a standard deviation of 10, has a z-score of (85 − 70) / 10 = 1.5. A confidence interval says how precisely a sample estimates a population value: with a sample mean of 50, a standard deviation of 10, and 100 observations, the 95% margin of error is about 1.96 × 10 / √100 = 1.96, so the interval is roughly 48.04 to 51.96. The Z-Score Calculator, Confidence Interval Calculator, P-Value Calculator, and Sample Size Calculator handle these, and the Probability Calculator covers the underlying chances — for example, the probability of rolling a total of 7 with two dice is 6/36, or 1 in 6.

Calculus in one page: rates and accumulations

Calculus has two halves. A derivative measures a rate of change: how fast something is changing at one instant. The derivative of x³ is 3x², so at x = 2 the function is growing at 3 × 4 = 12 units per unit of x. An integral measures accumulation: the area under a curve, or the total built up over an interval. The integral of x² from 0 to 1 is 1/3. Derivatives answer "how fast?", integrals answer "how much in total?" — speed and distance are the classic pair, since distance is the integral of speed and speed is the derivative of distance.

Most people meet calculus through those two questions rather than through symbols, and the tools on this site follow that split: the Derivative Calculator differentiates a function and finds the slope of its curve, while the Integral Calculator works out definite integrals numerically. The guide How to Solve Integrals Step by Step walks through the power rule, substitution, and definite integrals with worked examples.

Common mistakes

The mistakes that cost the most are almost never arithmetic slips; they are setup errors, and they repeat across every area above. Using the wrong base for a percentage, so a discount or a change is measured against the wrong number. Mixing up the two sides of a ratio, or the rise and the run of a slope. Using the diameter where a formula wants the radius, or mixing feet and inches in one calculation. Reporting the mean for a skewed list when the median describes it better, and reporting a sample standard deviation when the list is the whole population. Forgetting the + C on an indefinite integral, or forgetting that a definite integral needs its limits applied. Each of these is caught the same way: write the units down, check the answer against a rough estimate, and run the same numbers through the matching calculator to confirm.

Every tool in this cluster

The table below lists every math calculator on FigureQuick, with the situation each one is for. Start with the tool that matches the question in front of you, and use the guide above to check that the setup is right before trusting the answer.

CalculatorUse this when
Algebra CalculatorSolving equations and simplifying expressions — finding an unknown value, working with formulas, and checking each step.
Area CalculatorWorking out the area of rectangles, triangles, circles, and other shapes from their measurements.
Average CalculatorFinding the average (mean) of a list of numbers.
Big Number CalculatorAdding, subtracting, multiplying, and dividing very large numbers exactly, beyond normal calculator limits.
Binary CalculatorConverting between binary and decimal and doing binary arithmetic.
Circle CalculatorFinding a circle's area, circumference, diameter, and radius from any one measurement.
Common Factor CalculatorListing the factors two or more numbers share, and finding the largest one.
Confidence Interval CalculatorWorking out the range a population value probably falls in, from a sample mean and spread.
Derivative CalculatorDifferentiating a function and finding the slope of its curve at any point.
Exponent CalculatorRaising a number to a power, and working with powers and roots.
Factor CalculatorBreaking a number into its factors.
Fraction CalculatorAdding, subtracting, multiplying, and dividing fractions and seeing the simplified answer with its decimal value.
GCF CalculatorFinding the greatest common factor of two or more numbers.
Graphing CalculatorPlotting a function and reading off its roots, peaks, and values across a range.
Half-Life CalculatorWorking out how much of a substance remains after a number of half-lives.
Hex CalculatorConverting between hexadecimal and decimal and doing hex arithmetic.
Integral CalculatorWorking out the definite integral of a function between two limits — the area under its curve.
LCM CalculatorFinding the least common multiple of two or more numbers.
Log CalculatorWorking out logarithms to any base, including base 10 and the natural log.
Long Division CalculatorDoing long division step by step, with the quotient and remainder shown.
Matrix CalculatorAdding, multiplying, and inverting matrices, and finding determinants.
Mean, Median, Mode & Range CalculatorFinding the mean, median, mode, and range of a list of numbers in one place.
Number Sequence CalculatorFinding the next terms and the nth term of an arithmetic or geometric sequence.
P-Value CalculatorWorking out the p-value for a test statistic and judging statistical significance.
Percent Error CalculatorComparing a measured value with the true value and expressing the difference as a percentage.
Percent Off CalculatorWorking out the sale price and the saving on a discounted item.
Percentage CalculatorFinding a percentage of a number, what percent one number is of another, or a percent increase or decrease.
Permutation & Combination CalculatorCounting arrangements and selections — permutations where order matters, combinations where it does not.
Prime Factorization CalculatorBreaking a number into its prime factors.
Probability CalculatorWorking out the probability of an event, including combined and repeated events.
Pythagorean Theorem CalculatorFinding the missing side of a right triangle from the other two.
Quadratic Formula CalculatorSolving quadratic equations and finding their roots.
Random Number GeneratorGenerating random numbers in a range you choose.
Ratio CalculatorSimplifying ratios, scaling them, and solving for a missing value in a proportion.
Right Triangle CalculatorSolving a right triangle — all sides, angles, area, and perimeter — from the pieces you know.
Root CalculatorFinding square roots, cube roots, and nth roots.
Rounding CalculatorRounding a number to a chosen number of decimal places or significant figures.
Sample Size CalculatorWorking out how large a survey sample needs to be for a chosen confidence level and margin of error.
Scientific CalculatorDoing trigonometry, logarithms, powers, and roots — a scientific calculator in the browser.
Scientific Notation CalculatorConverting numbers to and from scientific notation.
Slope CalculatorFinding the slope of a line from two points, and the equation of the line.
Standard Deviation CalculatorFinding the mean, population standard deviation, and sample standard deviation of a list.
Statistics CalculatorSummarising a list of numbers — mean, median, mode, range, variance, and standard deviation.
Surface Area CalculatorWorking out the surface area of cubes, spheres, cylinders, cones, and other solids.
Triangle CalculatorSolving any triangle from three sides, two sides and the included angle, or two angles and a side.
Volume CalculatorWorking out the volume of boxes, cylinders, spheres, cones, and other solids.
Z-Score CalculatorFinding how many standard deviations a value sits from the mean.

Sources and methodology

Every figure in this guide comes from a named source, a labelled example assumption, or arithmetic shown in full. The formulas used here are the standard published definitions: percentages and percent change as defined in standard arithmetic; the Pythagorean theorem and the area and volume formulas of Euclidean geometry; the quadratic formula; the mean, median, mode, and standard deviation as defined in standard statistics, with population standard deviation dividing by n and sample standard deviation dividing by n − 1; the z-score as defined in standard statistics; and the power rule for integration. No external rates, brackets, or tables are used anywhere on this page — every calculator in the cluster works from the numbers entered and the standard formula shown in its own "How it works" section, which is the methodology stated for this category. All worked-example arithmetic was computed in Python and checked by hand, and the numbers are exact unless a rounded value is labelled as such. This guide is educational: it describes what the calculators compute, not advice about which result to act on. Last reviewed 2026-11-19.

Frequently asked questions

How do I take 20% off a price?

Multiply the price by 20 and divide by 100 to get the discount, then subtract it from the price. On a $150 item, 20% is $30, so you pay $120. The same rule works for any percentage: 25% off an $80 item is a $20 discount, leaving $60 to pay.

How do I calculate a percentage of a number?

Multiply the number by the percentage and divide by 100. For example, 15% of 240 is 240 × 15 / 100 = 36. To find what percent one number is of another, divide the first number by the second and multiply by 100: 36 is 15% of 240.

What is the difference between GCF and LCM?

The greatest common factor (GCF) is the largest number that divides into two or more numbers exactly — the GCF of 12 and 18 is 6. The least common multiple (LCM) is the smallest number both numbers divide into — the LCM of 12 and 18 is 36. The GCF simplifies fractions; the LCM gives fractions a common denominator. The guide GCF vs LCM explains both with worked examples.

How do I find the slope of a line?

Take two points on the line and divide the vertical change by the horizontal change: slope = (y₂ − y₁) / (x₂ − x₁). For the points (2, 3) and (6, 11), the slope is (11 − 3) / (6 − 2) = 8 / 4 = 2, so the line rises 2 units for every 1 unit across.

What is standard deviation in simple terms?

It is the average distance of a set of numbers from their mean, measured in the same units as the numbers. A small standard deviation means the numbers cluster tightly around the average; a large one means they are widely spread. For the scores 2, 4, 4, 4, 5, 5, 7, 9, the mean is 5 and the population standard deviation is 2.

How do I solve a quadratic equation?

Use the quadratic formula: for ax² + bx + c = 0, x = (−b ± √(b² − 4ac)) / 2a. For x² − 5x + 6 = 0, the discriminant is 25 − 24 = 1, so x = (5 ± 1) / 2, giving x = 3 and x = 2. If the discriminant is negative, there are no real solutions.

What is percent error and how is it calculated?

Percent error compares a measured value with a known true value: take the absolute difference between them, divide by the true value, and multiply by 100. If a scale reads 9.8 kg for a 10 kg weight, the percent error is |9.8 − 10| / 10 × 100 = 2%. The true value is always the denominator.

More Math Calculators

← Back to all calculators