The Complete Guide to Small Business Finance: Loans, Fees, and Profit
Small business finance comes down to three questions: how much must you sell to break even, what does borrowing cost, and what is the business worth. This guide answers all three with worked examples — a $50,000 loan at 7.5% costs $1,001.90 a month, and a business is valued on its earnings, not its revenue.
By Jacob Levy, Founder of FigureQuick.com · Last reviewed 2026-11-19
The three numbers that run a small business
A small business runs on three numbers: revenue, costs, and profit. Revenue is what customers pay. Costs split into fixed overhead — rent, insurance, software, and salaries that are due whether anything sells or not — and variable costs, the cost of each unit sold. Profit is what is left after both. A business can have strong sales and still lose money if the variable cost per unit is too close to the price, or if fixed overhead is higher than the margin on the units it sells. Every tool in this cluster works on one of those three numbers, or on the money that moves in and out around them: loans, fees, and the value of the business itself.
Cash flow is the fourth number, and it is the one that closes businesses. Profit is measured over a period; cash flow is measured day by day. A business can be profitable on paper and still run out of cash if customers pay slowly, if a loan payment falls due before the money comes in, or if a large order has to be paid for before it is sold. That is why the loan calculators in this cluster show the monthly payment, not just the total interest: the monthly payment is the cash-flow commitment, and it has to fit the money the business reliably brings in each month.
Break-even: how much you must sell
Break-even is the sales volume where a business stops losing money and starts making it. The formula is: break-even units equals fixed monthly overhead divided by the unit contribution margin, where the contribution margin is the unit selling price minus the unit variable cost. The contribution margin is the cash each sale contributes toward overhead, so dividing overhead by that margin gives the number of units that exactly covers costs. Every unit sold past break-even adds its full contribution margin straight to profit.
The target-profit version uses the same idea with the goal added on top: units for target profit equals fixed overhead plus target profit, divided by the contribution margin. There are only three levers: raise the price, cut the variable cost per unit, or cut fixed overhead. Of the three, a higher price usually moves break-even fastest, because it raises the contribution margin on every unit without touching costs — but only if volume holds. A price rise that halves sales can move break-even the wrong way.
Worked example: $12,000 of overhead at $85 a unit. With $12,000 in monthly fixed overhead, an $85 selling price, and $32 in variable cost per unit, the contribution margin is $53.00 a unit. Break-even is $12,000 divided by $53, which is 226.42 units — rounded up to 227 units a month, since a fraction of a unit cannot be sold, worth $19,295 in revenue. To make $10,000 of profit a month, the business needs ($12,000 plus $10,000) divided by $53, which is 415.09 units — 416 units. At 350 units a month, the current monthly net profit is 350 times $53 minus $12,000, which is $6,550.00. The Business Break-Even Calculator reproduces this example exactly.
Borrowing: what a business loan costs
A business loan is repaid in equal monthly instalments that cover both interest and principal. The monthly payment is M equals P times r divided by one minus (one plus r) to the power of minus n, where P is the loan amount, r is the monthly interest rate — the annual rate divided by 12 — and n is the total number of monthly payments. Each payment first covers the interest charged that month, and the rest reduces the balance, so the interest portion shrinks and the principal portion grows over the life of the loan. Total paid is the monthly payment multiplied by the number of months, and total interest is total paid minus the original loan amount.
That interest figure is the true cost of borrowing beyond the money itself, and it grows quickly with a higher rate or a longer term. Stretching a loan over more years lowers the monthly payment but raises the total interest paid. Before taking a loan, compare the monthly payment with the cash the business reliably brings in each month. A payment that leaves little room for slow months, repairs, or other costs can strain the business even when the loan itself is affordable on paper.
Worked example: $50,000 at 7.5% over 5 years. On a $50,000 loan at 7.5% a year over 5 years — 60 monthly payments at a monthly rate of 0.625% — the monthly payment is $1,001.90. Total paid over the five years is $60,113.85, so the total interest is $10,113.85. The same formula shows what a longer term costs: a $120,000 loan at 6% over 10 years has a monthly payment of $1,332.25, total paid of $159,869.52, and total interest of $39,869.52. The Business Loan Calculator reproduces both examples, and the guide How to Get a Commercial Loan covers the steps around the loan itself.
SBA loans: fees and what you actually receive
An SBA loan is a small business loan backed in part by the US Small Business Administration, which lets lenders offer longer terms than a conventional business loan. The payment uses the same amortisation formula as any other loan. What is different is the fee: an origination or SBA guarantee fee is taken out of the loan upfront, so the cash actually received is the loan amount minus that fee. A loan that looks like $150,000 on paper may disburse several thousand dollars less.
Extra principal payments go straight to the balance, which cuts the interest charged in every following month and shortens the loan. Lenders also look at debt service coverage: annual loan payments should be covered at least 1.25 times by the business's net operating income. If the payment shown is more than 80% of annual operating income, the loan is likely to strain the business.
Worked example: $150,000 at 9.25% over 10 years. A $150,000 loan at 9.25% over 10 years with a 2.5% fee costs $1,920.49 a month, disburses $146,250.00 after the fee is taken out, and costs $80,458.90 in total interest over the ten years. Adding $200 a month in extra principal payments changes the picture: on a $75,000 loan at 8% over 5 years with a 1.5% fee, the payment is $1,720.73 a month, $73,875.00 is disbursed, total interest falls to $13,905.19, and the loan pays off in 4.3 years instead of 5. The SBA Loan Calculator reproduces both examples month by month, so the payoff time and total interest shown are the real figures for that payment plan, not an estimate.
What the business is worth
Small businesses are usually valued on Seller's Discretionary Earnings (SDE), not on revenue or on the profit shown on the tax return. The formula is: valuation equals annual net profit plus owner salary plus discretionary add-backs, multiplied by a growth-adjusted industry multiple. SDE is the cash the business truly throws off in a year: reported profit plus the owner's pay and any personal or one-time expenses run through the business, since a buyer would not have to keep paying those.
The multiple depends on the industry — recurring-revenue software commands more than a brick-and-mortar shop — and the calculator adjusts it for growth: 20% or faster growth earns a 15% premium on the multiple, 10% or faster earns 5%, and shrinking revenue takes a 15% discount. The range rows show the same SDE at 85% of the adjusted multiple, for a quick sale, and 118%, for a strategic buyer paying for growth. The single biggest lever on exit price is SDE itself: every extra dollar of annual SDE is worth the full multiple at sale, so $20,000 more SDE a year is worth roughly $70,000 to $95,000 more at closing. Keep clean books and document the add-backs, because a buyer will only pay for earnings they can verify.
Worked example: $650,000 of revenue, $185,000 of SDE. A business with $650,000 of revenue, $140,000 of net profit, and $45,000 of add-backs has SDE of $185,000 a year. At an industry multiple of 3.2 and growth of 20%, the multiple earns a 15% premium, giving an adjusted multiple of 3.68. The estimated market valuation is $185,000 times 3.68, which is $680,800.00. The low end of the range is $578,680.00, and a buyer financing the purchase through an SBA loan would need a 10% down payment of $68,080.00. The Business Valuation Calculator reproduces this example exactly.
Depreciation: spreading the cost of what you buy
Depreciation spreads the cost of an asset over the years it is used, instead of counting the whole purchase in the year it was bought. The total amount to spread is the depreciable amount: asset cost minus salvage value, where the salvage value is what the asset is expected to be worth at the end of its useful life. An asset bought for $10,000 with a $1,000 salvage value has $9,000 to depreciate.
Straight-line depreciation divides that amount evenly over the useful life: annual depreciation equals cost minus salvage value, divided by useful life. For the $10,000 asset above with a 5-year life, that is $1,800 every year. It is the simplest method and the easiest to plan around, because the figure never changes. Double-declining-balance depreciation front-loads the cost instead. Each year it takes twice the straight-line rate — two divided by useful life — and applies it to the asset's remaining book value, so the first year is the largest. For the same asset, the rate is 40% and year-one depreciation is $4,000, far more than the $1,800 straight-line figure, with smaller amounts in later years as the book value falls. The choice between them is a matter of tax timing, and the calculator shows both so the difference is visible. The Depreciation Calculator works out both methods for any cost, salvage value, and useful life.
Use this calculator with clients → White-label.
Paying people: commission and payroll deductions
Commission is a share of the sales a person brings in. The formula is commission equals total sales times the commission rate, with the rate written as a decimal — a 10% rate on $25,000 of sales earns $2,500. Total pay adds the base salary on top: base salary plus commission. With no base salary, total pay is simply the commission itself, so a slow month pays nothing — plan for that uneven income rather than treating a good month as the normal one. The rate is the lever that matters most: one extra percentage point on $120,000 of sales is $1,200 more commission. That is why it pays to be clear, before a sale closes, whether the rate applies to the full sale value or only to part of it, and whether any sales are excluded.
Worked example: $25,000 of sales at 10%. On $25,000 of sales at a 10% commission rate, the commission earned is $2,500.00. With a $2,000 base salary, total pay is $4,500.00. The Commission Calculator reproduces this example. What lands in the employee's bank account is less than total pay, because payroll deductions come out first: federal income tax withholding, which depends on the employee's W-4, Social Security tax of 6.2% of wages up to the annual wage limit set by the Social Security Administration, Medicare tax of 1.45% of all wages, and state tax where it applies. The guide How to Calculate Payroll Deductions works through the full deduction list, and payroll is also part of the fixed overhead that feeds the break-even calculation above.
Card fees: what Stripe, Square, and PayPal take
Every card payment costs the business two slices: a percentage of the gross sale — the price plus any shipping charged to the buyer — and a fixed amount per order. The fee is gross times the rate plus the fixed fee, and the net payout is gross minus the fee. Stripe charges 2.9% plus $0.30 on a US card payment, with 1.5% added for an international card and 1.0% for currency conversion, as stated in Stripe's published fee schedule. Square charges 2.9% plus $0.30 for online payments and adds nothing for international cards or currency conversion, as stated in Square's published fee schedule. PayPal Goods & Services and invoicing cost 3.49% plus $0.49, with 1.5% added for international payments and 3.0% for currency conversion, as stated in PayPal's published fee schedule.
On a $100 domestic sale, Stripe and Square each take $3.20 and PayPal takes $3.98 — a gap of $0.78 per order in Stripe's and Square's favour. At 100 orders a month that is $78 a month, or $936 a year. International sales widen the gap: on a $450 sale with $10 of shipping charged, $120 of product cost, and $15 of shipping paid, with an international card and currency conversion, Stripe takes $25.14 and PayPal takes $37.24, while Square takes $13.64 because it adds no international or conversion surcharge. The Stripe vs PayPal Business Fee Calculator and the Stripe vs Square Fee Comparison Calculator run the same inputs through each platform, and the International Card & FX Fee Calculator isolates the cross-border and conversion costs. Platforms change their fees, so confirm the current schedule on the platform's own site.
Do customers recommend you? NPS
Net Promoter Score (NPS) measures how likely customers are to recommend a business, from a single survey question scored 0 to 10. Respondents who score 9 or 10 are promoters, 7 or 8 are passives, and 0 to 6 are detractors. The score is the percentage of promoters minus the percentage of detractors, so it runs from minus 100 to plus 100. Passives count in the total but not in the score: they dilute it, because every passive respondent is someone who is neither recommending the business nor warning people away. That is why the score rewards turning passives into promoters just as much as it punishes detractors.
As a rough guide, the bands the calculator uses are: above 70 is world-class, 50 to 69 is excellent, 20 to 49 is good, 0 to 19 needs improvement, and below 0 means there are more detractors than promoters. Averages vary a lot by industry, so the most useful comparison is the business's own score over time, not a single number in isolation. A rising score after a change — a faster delivery, a fixed returns process — is evidence the change worked; a falling score is an early warning before it shows up in sales.
Worked example: 70 promoters out of 100 responses. With 70 promoters, 20 passives, and 10 detractors out of 100 responses, the promoter share is 70.0% and the detractor share is 10.0%, giving an NPS of 60.0 — excellent on the calculator's bands. The NPS Calculator reproduces this example and shows the interpretation for any mix of responses.
Common mistakes
The most expensive mistakes in small business finance are usually arithmetic, not judgement. The first is pricing below break-even — selling units whose margin never covers overhead. The second is borrowing on the monthly payment alone without checking the total interest, or taking a loan whose payment leaves no room for a slow month. The third is valuing a business on revenue instead of Seller's Discretionary Earnings, which is what a buyer actually pays for. The fourth is forgetting that card fees apply to the gross sale including shipping charged, and that international sales cost more to collect. The fifth is paying commission on a rate nobody agreed in writing before the sale closed. Each of these is a calculation, and each has a calculator in the table below.
Every tool in this cluster
The table below lists every calculator in this cluster, with the situation each one is for.
| Calculator | Use this when |
|---|---|
| Business Break-Even Calculator | Finding the monthly unit sales and revenue needed to cover fixed overhead and hit a target profit. |
| Business Loan Calculator | Working out the monthly payment, total interest, and total paid on a business loan. |
| Business Valuation Calculator | Estimating a company's sale price from Seller's Discretionary Earnings and an industry multiple. |
| Commission Calculator | Working out commission earned from total sales and a rate, plus total pay when a base salary is included. |
| Depreciation Calculator | Working out straight-line and double-declining-balance depreciation for an asset. |
| International Card & FX Fee Calculator | Working out the cross-border surcharge and currency conversion markup on an international sale. |
| NPS Calculator | Working out Net Promoter Score from promoter, passive, and detractor counts. |
| SBA Loan Calculator | Working out an SBA loan payment, origination fee, net disbursed capital, and interest saved with extra payments. |
| Square Fee Calculator | Working out Square fees on online orders, in-person sales, and invoices, and the net profit margin. |
| Stripe Fee Calculator | Working out Stripe fees, international card surcharges, and reverse invoice amounts. |
| Stripe vs PayPal Business Fee Calculator | Comparing Stripe and PayPal fees side by side on the same order size, volume, and international sales. |
| Stripe vs Square Fee Comparison Calculator | Comparing Stripe and Square fees across online checkouts, invoices, and international cards. |
Sources and methodology
Every figure in this guide comes from a named source or a labelled example assumption. Payment fees: Stripe's published fee schedule (2.9% plus $0.30, with 1.5% for international cards and 1.0% for currency conversion), Square's published fee schedule (2.9% plus $0.30 for online payments, with no international or conversion surcharge), and PayPal's published fee schedule (3.49% plus $0.49, with 1.5% for international payments and 3.0% for currency conversion) — all as the calculators state them. Platforms change their fees, so confirm the current schedule on the platform's own site. Payroll tax: the employee share of FICA is 6.2% for Social Security up to the annual wage limit set by the Social Security Administration, plus 1.45% for Medicare with no cap. Loan rates and fees in the worked examples (7.5%, 9.25%, 2.5% fee) are labelled example assumptions, not current market rates or a lender's terms — check a current rate before using any example as a quote. The valuation method is Seller's Discretionary Earnings times a growth-adjusted industry multiple, as the calculator defines it; the NPS bands are the calculator's own bands. All worked-example arithmetic was computed from the calculators' own formulas and checked in Python against the calculator test cases. This guide is educational: it describes what the calculators compute, not advice about borrowing, pricing, or selling a business. Last reviewed 2026-11-19.
Frequently asked questions
How do you determine the value of a business?
Small businesses are usually valued on Seller's Discretionary Earnings (SDE): annual net profit plus the owner's salary plus discretionary add-backs, multiplied by an industry multiple adjusted for growth. A business with $185,000 of SDE at an adjusted multiple of 3.68 is worth $680,800. The Business Valuation Calculator works out the valuation and the range for any SDE and multiple.
How do you determine what a business is worth?
Start with SDE, not revenue: add the owner's salary and discretionary expenses back to net profit. Then apply the industry multiple, adjusted up for fast growth or down for shrinking revenue. The multiple depends on the industry — recurring-revenue businesses command higher multiples than brick-and-mortar shops — and the result is an estimate, not a guaranteed sale price.
How do you evaluate how much a business is worth?
Work out SDE from clean books, choose the multiple for the industry, and adjust it for growth: 20% or faster growth earns a 15% premium on the multiple, 10% or faster earns 5%, and shrinking revenue takes a 15% discount. Document every add-back, because a buyer only pays for earnings they can verify. The valuation range — 85% to 118% of the adjusted multiple — shows the spread between a quick sale and a strategic buyer.
How much does a business loan cost each month?
It depends on the amount, the rate, and the term. On a $50,000 loan at 7.5% over 5 years, the monthly payment is $1,001.90 and the total interest is $10,113.85. A longer term lowers the monthly payment but raises the total interest: a $120,000 loan at 6% over 10 years costs $1,332.25 a month and $39,869.52 in total interest. The Business Loan Calculator works out any combination.
How many units do I need to sell to break even?
Divide fixed monthly overhead by the contribution margin — the selling price minus the variable cost per unit. With $12,000 of overhead, an $85 price, and $32 of variable cost, the margin is $53 and break-even is 227 units a month. The Business Break-Even Calculator also shows the units needed for a target profit.
What is the difference between straight-line and double-declining depreciation?
Straight-line depreciation spreads the cost evenly: on a $10,000 asset with a $1,000 salvage value and a 5-year life, it is $1,800 every year. Double-declining-balance front-loads it: the first year takes twice the straight-line rate applied to the book value, which is $4,000 in year one, with smaller amounts in later years. The Depreciation Calculator shows both methods side by side.
What is a good Net Promoter Score?
On the bands the calculator uses, above 70 is world-class, 50 to 69 is excellent, 20 to 49 is good, 0 to 19 needs improvement, and below 0 means more detractors than promoters. Averages vary a lot by industry, so the most useful comparison is a business's own score over time. With 70 promoters, 20 passives, and 10 detractors out of 100 responses, the NPS is 60.0 — excellent.
